Vintage Ply manufactures IS:710 certified BWP grade 710 plywood at its Fatehpur plant, bonded with undiluted phenol formaldehyde resin for full boiling waterproof strength, and supplies dealers, interior contractors and fabricators across Madhya Pradesh with full load and part load dispatch.
710 plywood takes its name from IS:710, the boiling waterproof grade that sits above ordinary BWR and MR plywood in the IS classification system. The monsoon across Jabalpur, Bhopal and the Narmada belt, followed by dry Gwalior and Khandwa summers, puts weak bonding under constant pressure. Vintage Ply manufactures IS:710 certified 710 plywood with selected hardwood core veneers, undiluted phenol formaldehyde resin and vacuum pressure preservative treatment.
Every sheet is produced at our Fatehpur factory through a controlled 15 step process and checked for bonding strength, moisture content, thickness tolerance and boiling water resistance before it leaves the plant. Dealers, interior contractors, modular furniture fabricators and turnkey builders across Madhya Pradesh buy direct from the manufacturer, which keeps rates transparent and supply consistent.
From modular kitchens in Indore apartments to furniture workshops across Madhya Pradesh.
Base cabinets and sink units for kitchens in Indore, Bhopal and Jabalpur where ordinary MR plywood swells and fails around the sink area.
Vanity units, shower cladding and utility area cabinetry that sit in direct and repeated contact with water.
Wardrobes, beds and cabinetry that need to hold their shape through Madhya Pradesh's monsoon humidity without warping or delaminating.
Partitions, counters and display units for offices, showrooms and retail spaces across Indore, Bhopal and Gwalior.
Flush door cores and window panelling that stay dimensionally stable in humid coastal districts and dry inland zones alike.
Bulk supply for builders and turnkey interior contractors working on apartment complexes and villas across Madhya Pradesh.
| Supply Region | All Madhya Pradesh Districts |
|---|---|
| Core Material | Selected Hardwood Core |
| Bonding | Undiluted Phenol Formaldehyde Resin |
| Moisture Content | 8% - 12% |
| Available Thickness | 6mm, 9mm, 12mm, 16mm & 19mm |
| Standard Sizes | 8x4, 8x3, 7x4, 7x3 ft |
| Treatment | Vacuum Pressure Preservative |
| Boiling Water Test | 72 Hour Immersion, No Delamination |
| Certification | IS:710 BWP Grade |
Panels hold their bond after prolonged boiling water immersion, which is the standard sink units, bathroom vanities and wet area cabinetry are actually exposed to.
Zero gap hardwood core and undiluted resin keep veneer layers bonded under the daily steam, spills and humidity that ordinary MR plywood cannot take.
Vacuum pressure treated veneers guard against termites, borers and fungus, a real risk in older Madhya Pradesh buildings and ground floor installations.
Dealers get the same grade, shade and thickness on every reorder, which matters when a project runs across several months and multiple sites.
Four reasons buyers in Bhopal, Indore, Jabalpur and Gwalior move their 710 plywood orders to a direct manufacturer instead of a trading house.
Orders ship straight from our own Fatehpur plant, so you pay manufacturer rates and get one point of accountability for quality and timelines.
Each production batch is tested for glue shear strength, boiling water resistance, moisture content and thickness before it is packed for dispatch.
Vintage Ply panels carry a written guarantee against termite attack, borer damage and fungal decay for the warranty period stated on the sheet.
Full truck loads for dealers and part loads for project sites reach Madhya Pradesh destinations with packing that protects edges in transit.
What each test measures and what it means for the kitchen, bathroom or furniture piece built from that panel.
| Quality Check | What We Test | Our Benchmark | What It Means on Site |
|---|---|---|---|
| Glue Shear Strength | Bond strength between veneer layers | Tested dry and after water immersion | Layers stay bonded, so the panel does not separate at the edges around sinks, showers and steam. |
| Boiling Water Resistance | Bond behaviour after prolonged boiling | 72 hour immersion, no delamination | Safe for kitchens, bathroom vanities and wet areas across humid Madhya Pradesh districts. |
| Moisture Content | Water held inside the finished panel | Maintained between 8% and 12% | Panels do not swell in the rains or shrink in dry heat, so joints stay tight. |
| Thickness Tolerance | Uniformity across the full sheet | Calibrated and wide belt sanded | Hulls and cabinetry line up without extra carpenter or fabricator correction. |
| Preservative Retention | Chemical held inside the veneer | Vacuum pressure impregnated | Termite and borer protection stays intact even where the sheet has been cut. |
| Core Gap Inspection | Hollow pockets inside the core | Zero gap core composing | Screws, fittings and hardware hold firmly under load and vibration. |
Test details for a specific batch can be shared with the quotation for 710 plywood supplies in Madhya Pradesh.
The checks that decide whether a 710 plywood brand gets specified on a kitchen, bathroom or furniture project in Indore, Bhopal or Jabalpur.
Undiluted phenol formaldehyde resin holds the veneers together through the boiling water test and the daily steam and spills a kitchen or bathroom panel actually faces.
Zero gap core composing with no hollow pockets, so fittings and hardware hold firmly and the panel carries load without sagging over the years.
Preservative is driven through the veneer under vacuum pressure rather than brushed on the surface, so protection stays even after cutting.
Wide belt sanding and calibration keep thickness uniform across the sheet, which saves fabrication time on hull curvature and cabinetry alignment.
Every sheet carries printed branding and a duplicate proof QR code, so a Madhya Pradesh buyer can confirm the panel is genuine Vintage Ply.
Buying direct removes the trading margin, which matters on bulk project quantities for builders and large interior contractors.
Vintage Ply dispatches 710 plywood to dealers, interior contractors and project sites in these Madhya Pradesh cities and the districts around them.
Not listed above? We appoint dealers in open districts and still deliver project quantities anywhere in Madhya Pradesh. Talk to our team.
Answers to what dealers, contractors and furniture fabricators ask us most often before placing a first order.
Vintage Ply is a manufacturer, not a trading brand. All 710 plywood is produced at our own plant at B-29-30, UPSIDC Industrial Area, Malwan, Fatehpur, Uttar Pradesh, and dispatched to Madhya Pradesh from there.
710 plywood is manufactured to IS:710 with undiluted phenol formaldehyde resin and passes the 72 hour boiling water test, making it fully boiling waterproof. BWR plywood (IS:303) handles semi-humid interiors but not continuous moisture, and MR plywood is suited only to dry, low humidity rooms.
Standard thicknesses are 6mm, 9mm, 12mm, 16mm and 19mm in sheet sizes of 8x4, 8x3, 7x4 and 7x3 feet. Other sizes can be discussed for project quantities before production is scheduled.
Yes. Our 710 grade is bonded with undiluted phenol formaldehyde resin and tested for bond strength after 72 hours of boiling water immersion, which is what sink units, bathroom vanities and wet area cabinetry need to hold up without delamination.
Dispatch timelines depend on order size and current production schedule. Full truck loads for dealers and part loads for project sites are both accepted, and our team confirms a dispatch date in writing when the order is booked.
Every sheet carries printed branding and a duplicate proof QR code applied at the final stage of production. Scanning the code confirms the panel came from our plant, which protects buyers from counterfeit stock in the market.
Yes. Vintage Ply 710 plywood carries a written guarantee against termite attack, borer damage and fungal decay for the warranty period stated on the sheet and in the invoice documentation.
We appoint stocking dealers and distributors in districts that are currently open. Dealers get territory backing, display support and priority dispatch. Share your city and current business profile and our team will confirm availability.
Call +91 73079 47592, message us on WhatsApp or send your requirement to info@vintageply.com with the grade, thickness, size and quantity. Rates are shared directly by the manufacturer with no trading margin in between.
Send us your thickness and quantity requirement. Our team shares manufacturer rates, sample boards and a confirmed dispatch plan for your site, workshop or showroom.
