Vintage Ply manufactures IS:4990 grade film faced shuttering plywood at its Fatehpur plant, bonded with phenol formaldehyde resin for repeated RCC formwork reuse, and supplies dealers, contractors and infrastructure builders across Maharashtra with full load and part load dispatch.
Shuttering plywood has one job: hold wet concrete in its exact shape through pour after pour without warping, swelling or delaminating. High-rise towers in Mumbai and Pune, metro and highway infrastructure work and fast-moving residential sites across Maharashtra all put repeated vibration, moisture and load onto the same panel. Vintage Ply manufactures IS:4990 grade shuttering plywood with a zero gap hardwood core, phenol formaldehyde resin bonding and a smooth phenolic film face on both sides for a clean concrete finish.
Every sheet is produced at our Fatehpur factory through a controlled 15 step process and checked for bonding strength, moisture content, thickness tolerance and film adhesion before it leaves the plant. Contractors, formwork rental companies, dealers and infrastructure builders across Maharashtra buy direct from the manufacturer, which keeps rates transparent and supply consistent across large project quantities.
From high-rise formwork in Mumbai and Pune to bridge and metro infrastructure sites across Maharashtra.
Concrete shuttering for high-rise residential and commercial towers across Mumbai, Pune and Nagpur where formwork gets reused pour after pour.
Formwork panels for piers, decks and abutments on highway, flyover and metro rail projects across the state.
Wall, column and slab shuttering for fast-moving construction schedules in Mumbai, Thane and Pune's high-rise corridors.
Foundation, footing and structural formwork for factories, warehouses and logistics parks across Maharashtra's industrial belts.
Boundary hoarding and safety barricading panels that need to survive weeks of site exposure without warping.
Formwork for water tanks, retaining walls and foundation work where repeated wet concrete contact wears out ordinary plywood fast.
| Supply Region | All Maharashtra Districts |
|---|---|
| Core Material | Selected Hardwood Core, Zero Gap |
| Bonding | Phenol Formaldehyde (BWP) Resin |
| Face Finish | Phenolic Film Faced, Both Sides |
| Moisture Content | 8% - 12% |
| Available Thickness | 12mm, 15mm, 18mm & 19mm |
| Standard Sizes | 8x4, 7x4, 6x4 ft |
| Treatment | Vacuum Pressure Preservative |
| Reusability | 8-10+ Pours Without Delamination |
| Certification | IS:4990 Shuttering Grade |
Phenolic film on both faces resists water pickup and gives contractors a smooth, fair-faced concrete finish that needs less plastering after de-shuttering.
Zero gap hardwood core and phenol formaldehyde resin keep veneer layers bonded through the pouring, vibration and de-shuttering cycle, pour after pour.
Vacuum pressure treated veneers guard against termites, borers and fungus, a real risk when panels are stacked and stored on-site between pours.
Dealers and formwork contractors get the same grade, thickness and film finish on every reorder, which matters when a project runs across several months and multiple sites.
Four reasons buyers in Mumbai, Pune, Nashik and infrastructure sites across Maharashtra move their shuttering plywood orders to a direct manufacturer instead of a trading house.
Orders ship straight from our own Fatehpur plant, so you pay manufacturer rates and get one point of accountability for quality and timelines.
Each production batch is tested for glue shear strength, film adhesion, moisture content and thickness before it is packed for dispatch.
Vintage Ply panels carry a written guarantee against termite attack, borer damage and fungal decay for the warranty period stated on the sheet.
Full truck loads for dealers and part loads for project sites reach Maharashtra destinations with packing that protects edges in transit.
What each test measures and what it means for the slab, column or formwork panel built from that sheet.
| Quality Check | What We Test | Our Benchmark | What It Means on Site |
|---|---|---|---|
| Glue Shear Strength | Bond strength between veneer layers | Tested dry and after water immersion | Layers stay bonded, so the panel does not separate at the edges under repeated vibration and pouring. |
| Film Adhesion | Bond of phenolic film to face veneer | Tested for peel resistance after soaking | Film stays intact across multiple pours, giving a clean, fair-faced concrete finish each time. |
| Moisture Content | Water held inside the finished panel | Maintained between 8% and 12% | Panels do not swell in the rains or shrink in dry heat, so shuttering joints stay tight. |
| Thickness Tolerance | Uniformity across the full sheet | Calibrated and wide belt sanded | Slab and wall panels line up flush without extra carpenter correction on site. |
| Preservative Retention | Chemical held inside the veneer | Vacuum pressure impregnated | Termite and borer protection stays intact even where the sheet has been cut or stacked on site. |
| Core Gap Inspection | Hollow pockets inside the core | Zero gap core composing | Panels hold their shape under wet concrete load and vibration without sagging. |
Test details for a specific batch can be shared with the quotation for shuttering plywood supplies in Maharashtra.
The checks that decide whether a shuttering plywood brand gets specified on a project in Mumbai, Pune or an infrastructure site across Maharashtra.
Phenol formaldehyde resin holds the veneers together through the vibration, moisture and load a shuttering panel actually faces across 8-10+ reuse cycles.
Zero gap core composing with no hollow pockets, so the panel carries wet concrete load without sagging or bowing during the pour.
Preservative is driven through the veneer under vacuum pressure rather than brushed on the surface, so protection stays even after cutting.
Wide belt sanding and calibration keep thickness uniform across the sheet, which saves fabrication time on slab and wall alignment.
Every sheet carries printed branding and a duplicate proof QR code, so a Maharashtra buyer can confirm the panel is genuine Vintage Ply.
Buying direct removes the trading margin, which matters on bulk project quantities for contractors and formwork rental businesses.
Vintage Ply dispatches shuttering plywood to dealers, contractors and project sites in these Maharashtra cities and the districts around them.
Not listed above? We appoint dealers in open districts and still deliver project quantities anywhere in Maharashtra. Talk to our team.
Answers to what contractors, dealers and formwork rental businesses ask us most often before placing a first order.
Vintage Ply is a manufacturer, not a trading brand. All shuttering plywood is produced at our own plant at B-29-30, UPSIDC Industrial Area, Malwan, Fatehpur, Uttar Pradesh, and dispatched to Maharashtra from there.
Both grades share phenol formaldehyde resin bonding and a hardwood core. Shuttering plywood is manufactured to IS:4990 with a phenolic film face on both sides built for repeated concrete formwork reuse, while marine grade is manufactured to IS:710 for continuous direct water contact such as boat hulls and docks.
Standard thicknesses are 12mm, 15mm, 18mm and 19mm in sheet sizes of 8x4, 7x4 and 6x4 feet. Other sizes can be discussed for project quantities before production is scheduled.
Our film faced shuttering plywood is built for 8 to 10 or more reuse cycles when stored and cleaned correctly between pours, which brings down the effective formwork cost per square foot on a project.
Yes. Our shuttering grade is bonded with phenol formaldehyde resin over a zero gap hardwood core, which is what slab, column and beam formwork on high-rise towers, flyovers and metro projects needs to hold up under repeated pours.
Dispatch timelines depend on order size and current production schedule. Full truck loads for dealers and part loads for project sites are both accepted, and our team confirms a dispatch date in writing when the order is booked.
Every sheet carries printed branding and a duplicate proof QR code applied at the final stage of production. Scanning the code confirms the panel came from our plant, which protects buyers from counterfeit stock in the market.
Yes. Vintage Ply shuttering plywood carries a written guarantee against termite attack, borer damage and fungal decay for the warranty period stated on the sheet and in the invoice documentation.
We appoint stocking dealers and distributors in districts that are currently open. Dealers get territory backing, display support and priority dispatch. Share your city and current business profile and our team will confirm availability.
Call +91 73079 47592, message us on WhatsApp or send your requirement to info@vintageply.com with the grade, thickness, size and quantity. Rates are shared directly by the manufacturer with no trading margin in between.
Send us your thickness and quantity requirement. Our team shares manufacturer rates, sample boards and a confirmed dispatch plan for your construction site, dealership or rental business.
