Vintage Ply manufactures multi layer hardwood plywood with a zero gap hardwood core, bonded with undiluted phenol formaldehyde resin in 6mm to 19mm, and supplies dealers, architects and contractors across Andhra Pradesh with full load and part load dispatch.
Hardwood plywood is only as good as the core inside it. Vintage Ply handpicks mature timber logs, peels them into uniform veneers, jet dries those veneers to 8 percent moisture and composes the core with zero gap, so there are no hollow pockets between the layers. That core is what holds screws, carries shelf weight and keeps a shutter flat through Visakhapatnam humidity and Rayalaseema heat.
Every sheet is produced at our Fatehpur plant through a controlled 15 step process, bonded with undiluted phenol formaldehyde resin, vacuum pressure treated against termites and borers, and put through 20 plus tests for strength and water resistance before packing. Dealers, interior contractors, furniture units and turnkey builders across Andhra Pradesh buy direct from the manufacturer, which keeps rates transparent and supply consistent.
Every grade below is built on the same selected hardwood core and finished for a different site condition, so one manufacturer covers the full panel requirement of a project.
From single flat interiors in Guntur to multi tower fit outs in Visakhapatnam and Vijayawada.
Modular kitchens, wardrobes and false ceiling framework for apartment projects in Visakhapatnam, Vijayawada and Guntur.
Workstations, storage units, partitions and reception joinery for office fit outs in Visakhapatnam, Vijayawada and Amaravati.
Room furniture, wardrobes, headboards and flush doors for hotels and resorts in Visakhapatnam, Tirupati and Vijayawada.
Nurse stations, cabinetry and door shutters where hygiene, moisture resistance and fire safety compliance are required.
Display units, counters and back panelling for retail interiors that are rebuilt often and need dependable panel quality.
Furniture and doors that take daily rough use in schools, colleges, hostels and government buildings across the state.
| Product | Hardwood Plywood |
|---|---|
| Core Material | Selected Hardwood Core |
| Construction | Multi Layer Hardwood |
| Bonding | Phenol Formaldehyde Resin |
| Treatment | Vacuum Pressure Preservative |
| Moisture Content | 8% - 12% |
| Available Thickness | 6mm, 9mm, 12mm, 16mm & 19mm |
| Certification | ISI Standard Quality |
| Supply Region | All Andhra Pradesh Districts |
Core veneers are composed with no hollow pockets, so screws and hinges hold firmly and long shelves carry weight without bending in the middle.
Undiluted phenol formaldehyde resin holds the layers together through Visakhapatnam, Nellore and Kakinada coastal humidity, where ordinary commercial ply starts to delaminate.
Controlled moisture content of 8 to 12 percent keeps panels dimensionally stable in Kurnool, Anantapur and Rayalaseema summers, so shutters do not warp or twist.
Preservative is driven into the veneer under vacuum pressure, not brushed on, so termite and borer protection stays intact even where the sheet has been cut.
Four reasons buyers in Visakhapatnam, Vijayawada, Guntur and Tirupati move their plywood orders to a direct manufacturer instead of a trading house.
Orders ship straight from our own Fatehpur plant, so you pay manufacturer rates and get one point of accountability for quality and timelines.
Each production batch is tested for glue shear strength, boiling water resistance, moisture content and thickness before it is packed for dispatch.
Vintage Ply panels carry a written guarantee against termite attack, borer damage and fungal decay for the warranty period stated on the sheet.
Full truck loads for dealers and part loads for project sites reach Andhra Pradesh destinations with packing that protects edges in transit.
What each test measures and what it means for the furniture, shutter or door built from that panel.
| Quality Check | What We Test | Our Benchmark | What It Means on Site |
|---|---|---|---|
| Glue Shear Strength | Bond strength between veneer layers | Tested dry and after water immersion | Layers stay bonded, so the panel does not separate at the edges after a few monsoons. |
| Boiling Water Resistance | Bond behaviour after prolonged boiling | No delamination in the test cycle | Safe for kitchen sink units, bathroom vanities and coastal Andhra Pradesh interiors. |
| Moisture Content | Water held inside the finished panel | Maintained between 8% and 12% | Panels do not swell in the rains or shrink in dry heat, so joints stay tight. |
| Thickness Tolerance | Uniformity across the full sheet | Calibrated and wide belt sanded | Laminate presses evenly and shutters line up without extra carpenter correction. |
| Preservative Retention | Chemical held inside the veneer | Vacuum pressure impregnated | Termite and borer protection stays intact even where the sheet has been cut. |
| Core Gap Inspection | Hollow pockets inside the core | Zero gap core composing | Screws and hinges hold firmly and shelves carry weight without bending. |
Test details for a specific grade or batch can be shared with the quotation for project supplies in Andhra Pradesh.
The checks that decide whether a plywood brand gets specified on a project in Visakhapatnam, Vijayawada or Guntur.
Hardwood veneers run through the full thickness of the panel, not a hardwood face over a soft filler core, which is what gives the sheet its screw holding capacity.
Undiluted phenol formaldehyde resin holds the veneers together through the monsoon load that Andhra Pradesh puts on kitchen and bathroom furniture.
Preservative is driven through the veneer under vacuum pressure rather than brushed on the surface, so protection stays even after cutting.
Wide belt sanding and calibration keep thickness uniform across the sheet, which saves carpenter time on laminate pressing and shutter alignment.
Every sheet carries printed branding and a duplicate proof QR code, so a Andhra Pradesh buyer can confirm the panel is genuine Vintage Ply.
Buying direct removes the trading margin, which matters on bulk project quantities for builders and large interior contractors.
Vintage Ply dispatches plywood to dealers, carpenters and project sites in these Andhra Pradesh cities and the districts around them.
Not listed above? We appoint dealers in open districts and still deliver project quantities anywhere in Andhra Pradesh. Talk to our team.
Answers to what dealers, architects and homeowners ask us most often before placing a first order.
Hardwood plywood is built from hardwood veneers running through the full thickness of the panel, not a hardwood face pressed over a soft filler core. Vintage Ply composes the core with zero gap, so there are no hollow pockets between layers. That is what gives the sheet its screw holding capacity, shelf strength and resistance to bending.
Vintage Ply is a manufacturer, not a trading brand. All hardwood plywood, pine blockboards and flush doors are produced at our own plant at B-29-30, UPSIDC Industrial Area, Malwan, Fatehpur, Uttar Pradesh, and dispatched to Andhra Pradesh from there.
We supply boiling water proof hardwood plywood, termite proof hardwood plywood and fire retardant hardwood plywood, along with pine blockboards and flush doors. Dealers usually stock the boiling water proof and termite proof grades because those cover most residential interior work in the state.
Hardwood plywood is made in 6mm, 9mm, 12mm, 16mm and 19mm. Pine blockboards are made in 18mm, 19mm and 25mm, and flush doors in 32mm, 35mm, 38mm and 40mm. Project quantities in other sizes can be discussed before production is scheduled.
Yes. Our boiling water proof grade is bonded with undiluted phenol formaldehyde resin and tested for bond strength after water immersion, which is what a kitchen or bathroom unit in Visakhapatnam, Kakinada or Nellore needs to survive repeated monsoon seasons.
Preservative is driven into the veneer under vacuum pressure at stage 8 of our 15 step process rather than brushed on the surface. Protection therefore stays inside the panel even after the carpenter cuts the sheet on site.
Veneers are jet dried to roughly 8 percent moisture and the finished panel is held between 8 and 12 percent. That range is what keeps shutters from swelling in the Andhra Pradesh monsoon and shrinking in dry inland heat, so joints stay tight.
Dispatch timelines depend on order size and current production schedule. Full truck loads for dealers and part loads for project sites are both accepted, and our team confirms a dispatch date in writing when the order is booked.
Every sheet carries printed branding and a duplicate proof QR code applied at the final stage of production. Scanning the code confirms the panel came from our plant, which protects buyers from counterfeit stock in the market.
We appoint stocking dealers and distributors in districts that are currently open. Dealers get territory backing, display support and priority dispatch. Share your city and current business profile and our team will confirm availability.
Send us your grade, thickness and quantity requirement. Our team shares manufacturer rates, sample boards and a confirmed dispatch plan for your site or showroom.
