Vintage Ply manufactures ISI grade boiling water proof, termite proof and fire retardant plywood at its Fatehpur plant and supplies dealers, architects and contractors across Uttar Pradesh with full load and part load dispatch.
Uttar Pradesh is our home state and our hardest test. Summer heat in Agra, Jhansi and Prayagraj pulls moisture out of poorly seasoned panels, while monsoon humidity and winter damp across Lucknow, Kanpur and the western districts swell weakly bonded sheets. Vintage Ply builds for both conditions with hardwood core veneers, undiluted phenol formaldehyde resin and vacuum pressure preservative treatment.
Every sheet is produced at our Fatehpur factory through a controlled 15 step process and checked for bonding strength, moisture content, thickness tolerance and water resistance before it leaves the plant. Dealers, interior contractors, furniture units and turnkey builders across Uttar Pradesh buy direct from the manufacturer, which keeps rates transparent and supply consistent.
One manufacturer for the full panel requirement of a kitchen, wardrobe, office fit out or hospitality project.
From single flat interiors in Lucknow to multi tower fit outs in Noida and Ghaziabad.
Modular kitchens, wardrobes and false ceiling framework for apartment projects in Noida, Ghaziabad and Lucknow.
Workstations, storage units, partitions and reception joinery for office fit outs in Noida, Gomti Nagar and Kanpur.
Room furniture, wardrobes, headboards and flush doors for hotels and resorts in Agra, Varanasi and Ayodhya.
Nurse stations, cabinetry and door shutters where hygiene, moisture resistance and fire safety compliance are required.
Display units, counters and back panelling for retail interiors that are rebuilt often and need dependable panel quality.
Furniture and doors that take daily rough use in schools, colleges, hostels and government buildings across the state.
| Supply Region | All Uttar Pradesh Districts |
|---|---|
| Core Material | Selected Hardwood Core |
| Bonding | Phenol Formaldehyde Resin |
| Moisture Content | 8% - 12% |
| Available Thickness | 6mm, 9mm, 12mm, 16mm & 19mm |
| Standard Sizes | 8x4, 8x3, 7x4, 7x3 ft |
| Treatment | Vacuum Pressure Preservative |
| Certification | ISI Standard Quality |
Boiling water proof panels hold their bond through Lucknow, Kanpur and Gorakhpur monsoon humidity, which is where ordinary commercial plywood starts to delaminate.
Controlled moisture content of 8 to 12 percent keeps panels dimensionally stable through Agra, Jhansi and Prayagraj summers, so shutters do not warp or twist.
Vacuum pressure treated veneers guard against termites, borers and fungus, a real risk in older Uttar Pradesh buildings and ground floor installations.
Dealers get the same grade, shade and thickness on every reorder, which matters when a project runs across several months and multiple sites.
Four reasons buyers in Lucknow, Kanpur, Noida and Varanasi move their plywood orders to a direct manufacturer instead of a trading house.
Orders ship straight from our own Fatehpur plant, so you pay manufacturer rates and get one point of accountability for quality and timelines.
Each production batch is tested for glue shear strength, boiling water resistance, moisture content and thickness before it is packed for dispatch.
Vintage Ply panels carry a written guarantee against termite attack, borer damage and fungal decay for the warranty period stated on the sheet.
Full truck loads for dealers and part loads for project sites reach Uttar Pradesh destinations with packing that protects edges in transit.
What each test measures and what it means for the furniture, shutter or door built from that panel.
| Quality Check | What We Test | Our Benchmark | What It Means on Site |
|---|---|---|---|
| Glue Shear Strength | Bond strength between veneer layers | Tested dry and after water immersion | Layers stay bonded, so the panel does not separate at the edges after a few monsoons. |
| Boiling Water Resistance | Bond behaviour after prolonged boiling | No delamination in the test cycle | Safe for kitchen sink units, bathroom vanities and coastal Uttar Pradesh interiors. |
| Moisture Content | Water held inside the finished panel | Maintained between 8% and 12% | Panels do not swell in the rains or shrink in dry heat, so joints stay tight. |
| Thickness Tolerance | Uniformity across the full sheet | Calibrated and wide belt sanded | Laminate presses evenly and shutters line up without extra carpenter correction. |
| Preservative Retention | Chemical held inside the veneer | Vacuum pressure impregnated | Termite and borer protection stays intact even where the sheet has been cut. |
| Core Gap Inspection | Hollow pockets inside the core | Zero gap core composing | Screws and hinges hold firmly and shelves carry weight without bending. |
Test details for a specific grade or batch can be shared with the quotation for project supplies in Uttar Pradesh.
The checks that decide whether a plywood brand gets specified on a project in Lucknow, Noida or Varanasi.
Undiluted phenol formaldehyde resin holds the veneers together through the monsoon load that Uttar Pradesh puts on kitchen and bathroom furniture.
Zero gap core composing with no hollow pockets, so screws hold firmly and the panel carries weight without sagging over the years.
Preservative is driven through the veneer under vacuum pressure rather than brushed on the surface, so protection stays even after cutting.
Wide belt sanding and calibration keep thickness uniform across the sheet, which saves carpenter time on laminate pressing and shutter alignment.
Every sheet carries printed branding and a duplicate proof QR code, so a Uttar Pradesh buyer can confirm the panel is genuine Vintage Ply.
Buying direct removes the trading margin, which matters on bulk project quantities for builders and large interior contractors.
Vintage Ply dispatches plywood to dealers, carpenters and project sites in these Uttar Pradesh cities and the districts around them.
Not listed above? We appoint dealers in open districts and still deliver project quantities anywhere in Uttar Pradesh. Talk to our team.
Answers to what dealers, architects and homeowners ask us most often before placing a first order.
Vintage Ply is a manufacturer, not a trading brand. All plywood, block boards and flush doors are produced at our own plant at B-29-30, UPSIDC Industrial Area, Malwan, Fatehpur, Uttar Pradesh, which is inside Uttar Pradesh itself, so orders move direct from the plant to your godown or site.
We supply boiling water proof plywood, termite proof plywood and fire retardant plywood, along with block boards and flush doors. Dealers usually stock the boiling water proof and termite proof grades because those cover most residential interior work in the state.
Standard thicknesses are 6mm, 9mm, 12mm, 16mm and 19mm in sheet sizes of 8x4, 8x3, 7x4 and 7x3 feet. Other sizes can be discussed for project quantities before production is scheduled.
Yes. Our boiling water proof grade is bonded with undiluted phenol formaldehyde resin and tested for bond strength after water immersion, which is what a kitchen or bathroom unit in Lucknow, Kanpur or Noida needs to survive monsoon damp and dry summer heat.
Dispatch timelines depend on order size and current production schedule. Full truck loads for dealers and part loads for project sites are both accepted, and our team confirms a dispatch date in writing when the order is booked.
Every sheet carries printed branding and a duplicate proof QR code applied at the final stage of production. Scanning the code confirms the panel came from our plant, which protects buyers from counterfeit stock in the market.
Yes. Vintage Ply panels carry a written guarantee against termite attack, borer damage and fungal decay for the warranty period stated on the sheet and in the invoice documentation.
We appoint stocking dealers and distributors in districts that are currently open. Dealers get territory backing, display support and priority dispatch. Share your city and current business profile and our team will confirm availability.
Call +91 73079 47592, message us on WhatsApp or send your requirement to info@vintageply.com with the grade, thickness, size and quantity. Rates are shared directly by the manufacturer with no trading margin in between.
Send us your grade, thickness and quantity requirement. Our team shares manufacturer rates, sample boards and a confirmed dispatch plan for your site or showroom.
